How to maintain the adventure park is a work worthy of attention for the park operators who purchase the equipment of the adventure park, so what maintenance should be done on a daily basis? The following are adventure equipment manufacturers to introduce you how to easily maintain the equipment in the adventure park.

Plastic and fiberglass: After diluting and soaking with soapy water, disinfectant washing powder, bleaching powder, etc., scrub with a soft cloth or soft brush, rinse with clean water, dry with a cleaning cloth or dry in the sun, and finally spray with 84 disinfectant for disinfection .
Soft sponge: It can be washed with a soft cloth dipped in soapy water, or placed in the sun for disinfection.

Wooden products: Moisture-resistant, heat-resistant, non-fading wooden parts can be washed with soapy water, dried in the sun, and then sprayed with 84 disinfectant for disinfection.

Metal products: If you need to remove rust, you can use a brush to remove the floating rust, wipe it with a dry cloth, and after exposure to the sun, you can buy colorless Sanhe brand self-spraying paint, sweep and spray it at a distance of about 20 cm, and let it dry. Spray again for protection.

Electric circuits: Before cleaning, first make sure that the power is turned off, and watering is prohibited. Generally, wipe with a damp cloth, and then connect to the power supply after drying.

Others: Note that all indoor adventure park equipment must not have accumulated water (rain water, air-conditioning water...), and if found, drain it in time; the indoor place is often ventilated, and the four walls are sprayed and disinfected with hydrogen peroxide every week; check whether the connection is firm and necessary. Lubricate and check for damage.