• facebook
  • e-mail
  • youtube
  • youtube
  • youtube
  • linkedin
huiyu
imgboxbg

CERTIFICATIONS

/
Certificate

Certificate

Cheer Amusement® puts high priority on player’s safety

Safety

Cheer Amusement puts high priority on player's safety. We maintain a continuous and proactive approach to ensure we meet and exceed all North American and European standards, including the TÜV, GS-EN1176, CE for Europe and ASTM, CPSIA, UL94, NFPA701 for Northern America, for our indoor playground systems. So far, Cheer Amusement is the first indoor playground manufacturer in China to receive the GS-EN1176 certificate for indoor playgrounds.

Inspected by Certified Specialist

As the largest and the most professional leading manufacturer of indoor playground equipment in China, Cheer Amusement commits to provide indoor playgrounds with the highest quality and safety standards. With many years of experience in the playground industry, we are knowledgeable in designing and producing safe and rational indoor playgrounds that effectively prevent injury hazards. We implement safety concepts into our whole designing and manufacturing process to ensure our indoor playgrounds meet safety standards in every aspect. We set our indoor playgrounds to pass safety inspections in any country. Here are the safety standards that we follow:

US Safety Standards

ASTM F1918

As the largest and the most professional leading manufacturer of indoor playground equipment in China, Cheer Amusement commits to provide indoor playgrounds with the highest quality and safety standards. With many years of experience in the playground industry, we are knowledgeable in designing and producing safe and rational indoor playgrounds that effectively prevent injury hazards. We implement safety concepts into our whole designing and manufacturing process to ensure our indoor playgrounds meet safety standards in every aspect. We set our indoor playgrounds to pass safety inspections in any country. Here are the safety standards that we follow:

CPSIA

The Consumer Products Safety Improvement Act (CPSIA) of 2008 is a United States law signed on August 14, 2008 by President George Bush. The legislative bill was known as HR4040, sponsored by Congressman Bobby rush. It was approved by both the United States House of Representatives and Senate. It imposes new requirements on manufacturers of apparel, shoes, personal care products, accessories and jewelry, home furnishings, bedding, toys, electronics and video games, books, school supplies, educational materials and science kits.

Laws for children safety are very strict in USA and the safety standards for indoor playgrounds are also very high. To meet the safety law requirements and high-quality safety standards, our indoor playgrounds and equipments are specifically designed, manufactured and installed in compliance with those laws and standards in every aspect.

Shown below are our certified test reports of the CPSIA of USA:

Certificate

NFPA 701

NFPA 701 is a standard of the National Fire Protection Association. It was made for testing the flame resistance of fireproof materials such as building materials, outdoor shelters (like canvas, tents), fabrics, curtains, vinyl-coated fabrics and other materials applied to window materials.

All of the materials used for our indoor playgrounds and equipment, which are specifically manufactured for the NFPA 701, have been tested and proven to pass the NFPA tests and meet its standards. As a result, our materials used for indoor playgrounds are professional and safe for customers to operate it safely and successfully.

Shown below are our certified test reports of the NFPA 701:

Certificate

UL-94

UL-94, the Standard for Safety of Flammability of Plastic Materials for Part in Devices and Appliance testing is a plastic flammability standard released by underwriters Laboratories of the USA. The standard classifies plastics according to how they burn in various orientations and rank their thicknesses from lowest (least flame-retardant) to highest (most flame-retardant).

In addition to NFPA 701, our indoor playgrounds and equipment also meet the requirements and standards of the UL-94. The plastic materials we use are specifically tested and proved to be qualified; We have tested a great amount of our samples in various orientations and thickness, and all of the samples tested proved that our plastic materials meet the UL-94 standards in every aspect. Thus we can assure our plastic materials are very safe for indoor playground use.Shown below are our certified test reports of the UL-94:

Certificate

European Safety Standard

EN1176-10

The EN1176-10 is a European safety standard set for the safety of indoor playgrounds and outdoor playgrounds and includes general safety requirements and test methods for playground equipment. European countries use it as a reference of international safety standards for indoor and outdoor playgrounds.

We have been in business with many customers from European countries for many years. Our indoor playgrounds are proved to meet the EN1176-10 standards which many customers from European countries refer to as a crucial international safety standard.

Shown below are our certifications of the EN1176-10:

Certificate

EN1176-1 and EN1176-3

The EN1176-1 is a European safety standard set that specifically focuses on the general safety requirement and test methods for playground equipment and surfaces.

The EN1176-3 is a European safety standard set that specifically focuses on additional specific safety requirements and test methods for slides.

Shown before are our certifications of the EN1176-1 AND EN 1176-3 of Europe:

Certificate

EN71

European standard EN 71 specifies safety requirements for toys. Compliance with the standard is legally required for all toys sold in the European Union.

EN71 is another safety standard widely implemented in Europe and which our indoor playgrounds standards meet. Any indoor playground manufacturer should meet the requirements of this standard.

Shown below are our certifications of the EN71:

Certificate

CE

CE mark is a safety certification mark and serves as a passport to enter into the European market. CE stands for CONFORMITE EUROPEENNE. It is a compulsory certificate mark and all the products produced by Europe Union inner enterprises or enterprises from other countries should label the CE mark to prove that their products meet the basic requirements of the EU instruction of Technical Coordination and New Standardization Methods to circulate their products in EU market.

CE is an very important safety standard in Europe, all the indoor playgrounds should meet the CE standard if they want to enter into the European market. As a professional indoor playground exporter, we have long-term cooperation with our European customers and our indoor playgrounds exported to Europe meet the CE standard and pass its inspection.

Certificate

EU REACH Regulation (EC) of Europe

EU REACH Regulation (EC) No. 1907/2006 is a safety certification for Non Phthalates in Toys and Childcare Article.

Shown below is our certified test report of the EU REACH Regulation (EC) of Europe:

Certificate

Australia safety standard

The AS3533.4.2-2013 is a playground safety standard that is made specifically for indoor playgrounds.

Our indoor playgrounds are in compliance with the Australia safety standards especially for our Australian customers.

We strictly ensure to follow the standards in the AS 3533.4.2-2013 document in our designing, manufacturing process.

Canada Safety Standard

The CSA Z614-07(R2012) is a safety standard made by Canada for indoor and outdoor playgrounds. This is the safety standard that is commonly referred by our Canadian customers. Thus, we ensure that our indoor playgrounds are fully in compliance with this standard.

In order to conform to the requirements of CSAZ614-07(R2012), our indoor playgrounds exported to Canada are all designed, manufactured and installed in compliance with the CSAZ614-07(2012) standards. Thus our indoor playgrounds meet the requirements of the CSAZ614-07(2012) standards and pass all the local safety inspections.

ISO

ISO, the International Organization for Standardization, is an independent, non-governmental organization. It is the world’s largest developer of voluntary international standards and facilitates world trade by providing common standards between nations. Nearly twenty thousand standards have been set from manufactured products and technology to food safety, agriculture and healthcare.

The ISO standard is one of the most implemented international safety standards as almost every country accepts it. Our indoor playgrounds also meet the requirements of ISO standard in every aspect.

Shown below is our Certificate of Registration of ISO:

Certificate

US & Europe Norm Trampoline Parks

Cheer is the first and only supplier in China who has both the TUV and ASTM certificates for trampoline parks. Our trampoline park materials have passed all the tests by TUV Rheinland, such as EN71-1 Mechanical and physical properties, EN71-2:2011 Flammability, EN71-3:2013 Migration of 19 Elements, and tested according to ASYM standards such as ASTM F 1478-11 Performance Requirements and Structural Interity, as well as the ASTM F381-14, ASTM F1918-12 and ASTM F2970-13 and so on.

Shown below are our certificate for US & Europe norm trampoline parks:

Certificate

CHINA-MARK

"China Mark" certification marks that Cheer Amusement satisfies German Quality standards as well, in respect to Industry Standards, Production Controlled, and Safety Performance. With absolute quality and safety, our customers can enjoy endless fun and worry-free.

Certificate

JOIN OUR E-MAIL LIST

Username used for comment:
邮箱
Description:

FOR PRODUCTS

FOR PARTS

© 2021 CHEER AMUSEMENT All rights reserved.  苏ICP备18029487号-4     Powered by 300.cn

© 2021 CHEER AMUSEMENT All rights reserved. 

苏ICP备18029487号-4    Powered by 300.cn